×
Click for more products.
No products were found.

LOST 3.0 STUB DRIVER

The Lost Stub Driver 3.0 is a high performance surfboard perfect for intermediate surfers as it is not as high performance as the model it comes from LOST DRIVER 3.0 and works in the average surf conditions that most of us surf in on a daily basis. The surfboard surfboard developed by Kolohe Andino.

Read moreShow less
€628.10 (tax incl.)
Board Sizes
Painted
Fins Systeme
Description

STUB DRIVER 3.0 LOST

The new Stub Driver from Lost Surfboards is the surfboard you were looking for on a daily basis. Developed by Kolohe Andino the Lost 3.0 STUB DRIVER is a direct derivative of the LOST DRIVER 3.0.

A surfboard designed for elite surfers looking for the "Ultimate Riding Machine". Tested primarily in and around World Tour waves (not necessarily the typical 1-3 foot soft tangle that most of us suffer through on a daily basis), the DRIVER3.0 still left room on the bottom end for superior performance in smaller waves.

  • SURF LEVEL: You have your signature style. Assessing the formation and catching any wave now allows you to surf a wide range of surfboards surf designs.
  • WAVE SIZE: Waves from waist high
  • WAVE TYPE: Works in Beach Breaks but also in Point Breaks and Reef Breaks
  • WAVE POWER: Adapts to all kinds of daily conditions; very forgiving.

COMPARISON LOST 3.0 SUB DRIVER vs LOST SUB DRIVER

Unlike the Sub-Driver (our other stepped performance surfboards ), the 3.0 STUB does not use vee in the tail. Instead, it features a continuous combination of rocker and concavo. This is the main difference between the two. Although noticeably relaxed compared to the rocker of the DRIVER 3.0, it is still loose and lively, quick and easy to release under the rear foot. Fits more easily into small pockets or fast, steep sections than the SubDriver. Perfect for small beach breakers.

Similarities in the rocker, bottom contours and outline, keep a closer feel when switching between the DRIVER3.0 and 3.0STUB. That was the goal and that is the result.

HIGHLIGHTS LOST STUB DRIVER 3.0

Compared to the LOST DRIVER3.0

  • Relaxed entry rocker, with a slightly wider nose area.
  • Relaxed tail rocker, with a light hip and wider tail block (but not as wide as the SubDrivers).
  • Wider overall, with thickness carried more toward the nose and under the rear foot.
  • Deeper single and double concave combination, for better handling in smaller waves.
  • Slightly flatter deck, with more rounded and forgiving edges, allowing the surfer more margin for error.

Working with Kolohe, who after riding the LOST DRIVER 3.0 in proper surf, wanted to feel like he was riding the same surfboard, in T-Street or small Trestles. Riding SubDrivers "felt almost stiff." He wanted a surfboard that required no adjustments in technique and he could switch seamlessly between DRIVER3.0.

"Why not just make a surfboard step-down from that one?"

That's exactly what Lost Surfboards has done with this surfboard. Lost has left it in the hands of its WQS riders: Crosby Cola, Cole Houshmand, Eli Hanniman and Michael Dunphy, all of whom immediately responded with positive feedback. Now the Lost Stub Driver 3.0 is part of the Lost team surfers' quiver for when it's time to surf small waves in the Challenger Series.

what kind of surfer do we recommend the LOST STUB DRIVER 3.0 to?

If you are passionate about high performance surfing, you like to surf with high performance surfboards and the type of waves you usually surf are of good quality, then the LOST 3.0 STUB is perfect for you.

what size of surfboard lost do we recommend?

Designed to be surfed just 1" shorter than a DRIVER 3.0 and that is precisely what the stock stub driver sizes show

For example: If you surf the LOST DRIVER 3.0 in 6'0", we recommend the LOST 3.0 STUB in 5'11". That size should fit perfectly. If you have to choose 2 surfboards surfboards for your quiver, we are sure that the DRIVER 3.0 and the STUB DRIVER 3.0 form the perfect duo.

STANDARD MEASUREMENTS STUB DRIVER 3.0

  • 5'2" x 17.50" x 2.15" - 20.65L
  • 5'3" x 17.75" x 2.20" - 21.65L
  • 5'4" x 18.00" x 2.22" - 22.60L
  • 5'5" x 18.18" x 2.25" - 23.50L
  • 5'6" x 18.32" x 2.28" - 24.40L
  • 5'7" x 18.50" x 2.32" - 25.40L
  • 5'8" x 18.63" x 2.34" - 26.40L
  • 5'9" x 18.75" x 2.38" - 27.40L
  • 5'10" x 19.00" x 2.40" - 28.40L
  • 5'11" x 19.25" x 2.42" - 29.35L
  • 6'0" x 19.50" x 2.45" - 30.50L
  • 6'1" x 19.63" x 2.50" - 31.75L
  • 6'2" x 19.88" x 2.53" - 33.00L
  • 6'3" x 20.13" x 2.57" - 34.25L
  • 6'4" x 20.38" x 2.60" - 35.50L
  • 6'5" x 20.50" x 2.63" - 36.75L
  • 6'6" x 20.75" x 2.70" - 38.50L
  • 6'8" x 21.25" x 2.75" - 41.50L
Read moreShow less
Product Details

Data sheet

Name
LOST 3.0 STUB DRIVER
Season
2023
Fins Configuration
3 FINS
Material
PU
Delivery Time
4 weeks
Shipping & Returns
DELIVERY INFORMATION
TAXES
You may also like
€628.10 (tax incl.)

matt Biolos has done it again and has come up with a winning surfboard! The new Lost Surfboards Driver 3.0 is the result of 3 years of work. Mayhem is always looking for ways to push their shapes. And this time his latest creation is Lost Surfboards Driver 3.0 with squash tail.

Check with us for delivery times on CUSTOM BOARDS orders LOST

When ordering your custom surfboard, be sure to check with us for delivery time (info@singlequiver.com). Time may vary depending on the technology chosen.

Out of Stock
€599.17 (tax incl.)

matt Biolos has done it again and has come up with a winning surfboard! The new Lost Surfboards Driver 3.0 is the result of 3 years of work. Mayhem is always looking for ways to push their shapes. And this time his latest creation is Lost Surfboards Driver 3.0.

MEASUREMENT AVAILABLE IN STOCK: 5.11 X 18.88 X 2.44 X 28.50 L PRO DIMENSIONS. GRIFFIN DIMS. SQUASH TAIL

24 HOUR SHIPPING

CONTACT US

  • Single Quiver SURFSHOP
  • Langileria N126 Local 2
  • 48940 Leioa, Bizkaia (España)
  • Contact Us (+34) 94 612 22 77 | (+34) 622 149 356

© 2023 SingleQuiver - All Rights Reserved

Menu

Settings

Create a free account to save loved items.

Sign in