×
Click for more products.
No products were found.

Lost Surfboard LIGHT SPEED SUB DRIVER 2.0 5'11 FCS II

5’11 x 19.75 x 2.45 x 31.00L

Check with us for surfboards from Lost Surfboards in stock for shipping in 24-48 hours.

When ordering your custom board make sure you double check the delivery time with us (info@singlequiver.com). The time may vary depending on your definite chosen style.

Read moreShow less
Limited special offer
€754.20 (tax incl.) €838.00
Description

SUB DRIVER 2.0

5’11 x 19.75 x 2.45 x 31.00L

Featured updates and adjustments include…

  • An even wider, more forgiving, nose:  Designed to increase forward drive for us mortals and lend more stability for hot shots landing radical airs.  The wider nose creates a straighter forward outline which paddles into waves easier and subsequently builds forward momentum faster in sub-par surf.
  • Smoothed out and re-imagined the wide hip in the tail:  Primarily to balance the wider forward outline, it allows more control at speed and a more effortless initiation of bottom turns and cutbacks.  The hip is still noticeable and then angles into the wide squash tail.  The wide tail creates a stable platform, especially in small waves.  The hip breaks the rail line and creates a pivot point to crank tight, powerful turns in lesser surf.  Making it easier for us to ride a performance shape even in poor surf.
  • Added thickness along the center (stringer line) with increased “vee” deck and more refined rails:  Lowered rail volume (without lowering overall volume) to encourage radical rail turns and make a more nimble, reactive board that still floats through flats, and surfs forgiving.  The thicker centerline under chest aids paddling and makes for more drive off the front foot gas pedal.
  • A deeper concave in the rear third of the board:  The rail rocker transitions from a modest forward concave, to a deeper, more-curvy, rail line through the front fins.  It then accelerates upward to a slight vee behind the rear fin and out the tail.  There is a good amount of double concave through the tail, adding lift and helping the water squirt through and release.

The SUB DRIVER 2.0’s curvy, hyper extended, rail rocker creates a hinge under the rear foot and counterbalances the low, flat centerline tail rocker, enabling it to be surfed tight and vertical in the pocket, as well as the already speedy down the line drive.

The wide nose and tail block combined with the low tail rocker and generous dims, allow the SUB DRIVER 2.0 to be ridden 1-2” shorter than a DRIVER 2.0 or similar performance shortboard. Now available in standard sizing and the larger scale, SUB DRIVER 2. BRO dims.

If you’re looking for a tried, tested and proven small wave performance machine, look no further than the SUB DRIVER 2.0.

LIGHT SPEED TECNOLOGY

LightSpeed is our proprietary surfboard construction built with lightweight EPS foam and high strength epoxy resin. LightSpeed uses a combination of Rapid-Reflex Carbon Fiber as well vibration dampening Innegra-Fibers, woven into the finest custom performance fiberglass cloth.

Like the name implies, LightSpeed is both light and exceptionally fast, allowing you to take your surfing to new levels of speed and Pro-formance.

LIGHT SPEED Custom Composite features:

  • Ultra-Light / Ultra-Lively Foam Core: Steam molded, High Strength-to-Weight Ratio, fused cell, water resistant, stringer-less EPS foam core.
  • High-Strength, Flexible, Impact Resistant, Epoxy Resin System. Woven Carbon Fiber Centerline “Stringer” (top and bottom): Engineered to add both strength and Rapid-Reflex “pop”, with just enough release to feel forgiving underfoot. The Carbon loads up under foot pressure, and springs upon release.
  • Fused Carbon, Tail Reinforcement Patches: Transfers more direct input into rail and adds strength.
  • Centerline Aligned Carbon “Exo-Stringers”: Enable natural Torsional Twist, similar to a wood stringer board, but lighter, and with a much faster reflex reaction and more “pop”.
  • Innegra Infused, Engineered Composite Fiberglass: A multi weave (6oz lengthwise, woven with 4oz, rail to rail) fiberglass, top and bottom, adds significant break strength, while keeping the boards Ultra-light and Ultra-lively.
  • 5oz Warp-Weave Fiberglass: A multi weave (6oz lengthwise, woven with 4oz, rail to rail) fiberglass, top and bottom, adds significant break strength, while keeping the boards.

LightSpeed – Light and exceptionally fast technology, allowing you to take your small wave and everyday surfing to new levels of speed and Pro-formance.

Read moreShow less
Product Details
TB-LSSDB20511FCS

Data sheet

Name
LOST LIGHT SPEED SUB DRIVER 2.0
Season
2021
Fins Configuration
3 FINS
Type of Tail
Round Square
Type of product
Shortboard
Material
LOST LIGHT SPEED DRIVER 2.0
Delivery Time
24 - 48 horas
Shipping & Returns
DELIVERY INFORMATION
TAXES
You may also like
Out of Stock
€100.00 (tax incl.) €125.00

Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing. Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.

Color white: Size L

Color Green: Size L

Color blue: Size M

€106.25 (tax incl.) €125.00

The FCS All Day Purpose surf cover is an ultra-lightweight and durable travel cover that is the ideal cover for everyday use on the way to and from the beach.

Out of Stock
€450.00 (tax incl.)

The XCEL Comp X wetsuit is a wetsuit designed for maximum flexibility. A very light and warm suit that dries quickly thanks to the use of a TDC neoprene, almost all of the suit.

Available with Xcel Black logo.

CONTACT US

  • Single Quiver SURFSHOP
  • Langileria N126 Local 2
  • 48940 Leioa, Bizkaia (España)
  • Contact Us (+34) 94 612 22 77 | (+34) 622 149 356

© 2023 SingleQuiver - All Rights Reserved

Menu

Settings

Create a free account to save loved items.

Sign in